|
Product Benefits at
a Glance:
How-To heating up
your stones with our Hot Stone Heater (Quick start guide)
No worries: our Hot
Stone Heater is pretty easy to operate. Also as inexperienced user you
will get your stones fast and easyly to the perfect massaging temperature.
And so does it work:
Instructions:
1.
Always clean the stones in front of every usage
2. Put a
towel next to the heater to place the stones after usage.
3. Put
the stones into the heater.
4. Cover
the stones completely with warm tap water. Please never fill the water
higher then 2-3cm under the top edge.
5.
Connect the device to the power outlet and choose the desired temperature
by setting the temperature switch. The setted temperature will be shown on
the display.
6.
Switch the device on. The temperature still can be varied.
7. The
light turns off automatically when the setted temperature is reached.
Please wait 20 to 30 minutes after the water is fully heated, so you can
be sure that also large stones are completely heated.
6. Take
the hot stones by using a trowel out of the Hot Stone Heater.
7. Check
the temperature cerfully with your hands before you will use
them.
8. If
the massaging stones are to hot, put them on a towel for cooling or put a
towel between the stones and skin.
9. After
finishing the therapy, switch off and disconnect the device from the power
socket.
Description of
device:
The
device has an digital display with which the desired temperature can be
setted. The will also inform you about possible
dysfunctions.
An
indicator light informs you if the desired temperature is
reached.
With the
plus- and minus buttons the temperature can be setted.
With the
On-/Off switch the device will be started or switched off.
The
water reservoir can be removed from the heater for filling. So it can be
cleaned easily as well.
By using
the cover, the device will hold the setted temperature
constantly.
Maintenance and
cleaning:
1. Clean the device
after every usage.
2. Switch off and disconnect the device from the
power socket before your start cleaning.
3. Allow the device cooling to
room temperature , before you start cleaning.
4. Remove all stones
first. After that you can remove the water.
5. Remove the water
reservoir and clean it with warm, soapy water. Clean it thoroughly with
pure water and dry well with a lint-free cloth.
6. Clean
the heater with warm, soapy water and rinse with pure water.
7. Let the
stones cool down and clean them with lukewarm water.
Stone-Set with 45
stones in decorativ wooden box consits of:
1 x
super-sized stone (sacrum,solar plexus)
10 x large-sized stones
(backbone, thigh, legs)
14 x medium-sized stones (hands,
arms)
6 x small-sized stones (neck, face,
cervix)
2 x small stones for pressure point therapy
(backbone, neck)
8 x stones for toe
therapy
2 x flat and ovale shaped marble stones for
cryotherapy
2 x small stones for
eyes
|
